Safety operation precautions for steel pretreatment line
1. The projectiles scattered on the ground around the machine should be swept up at any time and anywhere in time to prevent slipping and injuring people and causing accidents. After each shift, the shot around the machine should be swept clean to achieve daily production.
2. When the blast machine is working, any personnel should be away from the chamber (especially the side where the blast machine is installed). When the workpiece blast cleaning is completed, should stop enough time to open the door of the blast room.
3. the total power supply of the equipment should be cut off during the maintenance of the blast cleaning machine and marked in the corresponding part of the console.
4. chain and belt protection devices can only be removed during maintenance, and should be reinstalled after the completion of maintenance work.
Through the common parts of the shot blasting machine
One, the appearance of the workpiece remaining projectile development blowing clearing; each gate tube above are set a gate, the shaft to receive vibration into the attack can actively mediate the discharge, the parts in the upside down type shot blasting machine.
Two, by the spiral bailer mainly by accelerating electromechanical, spiral shaft, spiral body shell composition.
Three, there are two control pellet steadfastness, separate cut from the dismantler of the projectile.
Fourth, attention to detail in the production of work is good out of the product.
Shot blasting machine: the primary by the migration shift mechanism, impeller, shell, directional set, split shot wheel, guard plate and other components; good sealing; with square seat outer spherical ball bearings, dust removal system: the primary by the bag type dust collector breeze machine, dust removal pipeline together with the composition of dust removal fragmentation. The above 5 components of the through type shot blasting machine is also an important factor in the formation of machine quality good and bad. Blowing arrangement: the adoption of low-pressure fan and a small piece of auxiliary chamber in the chamber with a consistent angle of multiple groups of flexible blowing nozzle, easy to maintain the respective blast machine .