How to properly check whether the steel pretreatment line accessories need to be replaced?
1, before the operation of the shot blasting machine, all the movement of the shot blasting machine accessories need frequent lubrication.
2, in the process of use to frequently check the wear of the blast wheel impeller, blade, orientation sleeve and other wearing parts, if the wear is serious, must be replaced in a timely manner.
3、Check whether the fixed spring card is placed reliably, if there is damage, must be replaced immediately, in order to avoid accidents.
4、Regularly inspect the guard plate of the blasting machine, if damaged, replace it immediately.
5, the shot blasting machine and vibration conveyor is the vibration of the machine parts, before starting the shot blasting machine must check the shot blasting machine bolts, nuts are not loose; vibration of the vibration conveyor, motor fixed nuts are not loose, if there is loose phenomenon should be tightened in time.
Shot blasting machine application industry is very wide, such as casting industry, steel pipe industry, hull industry, automotive industry and so on. Its main purpose is to achieve a beautiful and smooth workpiece, increase the workpiece process, specifically is the steel pipe rust removal, heater in the spray paint before the rust treatment and so on. So we choose the shot blasting machine from which three aspects to judge the performance of the shot blasting machine?
1, the appearance of the visual observation of the quality of shot blasting machine can be seen from the appearance of good quality shot blasting machine appearance of good integrity, the parts: lifting, separation, shot blasting machine, platform and other orderly arrangement, the parts of the articulation and good integrity, relatively speaking, poor quality, unreasonable layout, the future use of the process is prone to cause large losses of equipment, poor shot blasting effect, low production efficiency and other problems.
2, shot blasting machine with material By measuring the thickness of the shot blasting machine with material quality comparison, the current shot blasting machine main blast chamber shell usually uses 8-10mm specifications welded iron plate, while our company's shot blasting machine using 12mm iron plate. The main blast chamber wall using high chromium molybdenum alloy steel plate or casting wear plate, improve the service life of the equipment, the guard plate using high chromium molybdenum alloy steel plate, compared with casting wear plate to improve the life of more than 50%.
3, the efficiency of the blast machine and the quality of its wearing parts The blast machine is the core working parts of the blast cleaning machine, through the motor drive, the projectile shot out, so its service life directly affects the use of blast cleaning machine, Kun Yulin wearing parts are imported, large blast volume design, efficiency increased by 30%, quiet design, low noise, service life is 3-5 times the domestic.