Steel plate pretreatment line working characteristics
The steel shot blasting machine equipment can continuously and continuously descale, clean and pretreat all kinds of steel such as steel plates, steel, steel beams, sections and so on. Easy to operate, just load the steel into the machine, press the start button and after a short cycle the system will automatically remove the processed material, i.e. the cleaning process is completed, removing all dust and residual pellet material. The indoor roll coating consists of a high chrome wear resistant sheath and a limit ring. The high chrome wear sheath is used to protect the rolls and withstand the impact of the bullet. The limit ring keeps the workpiece running at the predetermined position to prevent deviation and cause accidents. It mainly consists of upper and lower drive, cylinder, belt, hopper, etc.
During the cleaning process of the steel blasting machine equipment, the steel structure or steel is fed into the blast area of the cleaning machine chamber by electronically controlled adjustable speed conveyor rollers. The entire surface of the workpiece is subjected to strong and dense projectiles and friction from different coordinate directions. Oxidation, rust and dirt are quickly removed from it, and the steel surface obtains a smooth surface with roughness, and the workpiece is loaded and unloaded on both sides of the inlet and outlet rollers.
Steel shot blasting machine equipment hoist upper and lower diameter pulley by the rib, wheel plate and hub set welded into a polygonal structure to enhance friction, to avoid sliding phenomenon, to extend the service life of the belt. The hoist cover is bent and opened, and the cover in the middle of the hoist can be opened to repair the replacement hopper and belt. Open the cover on the lower shell of the hoist to eliminate the blockage of the projectile at the bottom. Adjust the bolts on both sides of the hoist's upper housing to drive the lower plate and keep the hoist belt loose and tight. The upper and lower pulleys are equipped with spherical spherical ball bearings, which are automatically adjustable for vibration shock and good sealing performance.