Steel pretreatment line manufacturers: shot blasting machine is a key component of the equipment
Shot blasting machine equipment is the key components of the shot blasting machine, shot blasting machine selected for the single disc shot blasting machine, it is our application of the United States Pangborn technology by processing and installation, shot blasting machine is mainly composed of impeller, spindle and main bearing housing, shell, directional sleeve, split shot wheel, blade, shield, transmission device, motor and bearings and other components.
The shot blasting machine shot blasting machine for the unit disk structure, so the inflow performance of the projectile is good, the unit power of the projectile volume is large, the impeller body of the shot blasting machine is close to the spindle end, reasonable structure, reasonable and compact arrangement, easy maintenance. The gear shot blasting machine can handle 2 or 3 or 6 gears at the same time, quiet and clean operating environment, less human intervention, "zero dead angle" workpiece finishing even in hard-to-reach places, strict tolerances, longer machine life and less need for spare parts replacement is the goal of DISA, the equipment also has the following characteristics The machine also has the following features
1. The shot blasting machine working tank can be divided into 2/3/6 independent processing compartments, each compartment processing a workpiece, which greatly improves the flexibility, versatility and high productivity of the machine
2. The positive and negative vibration cycle of the media flow ensures that both sides of the gear are polished. According to the gear specifications, the size and shape of the abrasive is accurately selected to ensure that the root of the gear and other areas that are more difficult to reach are given a high quality finish.
3. U-shaped work slot, specially calculated abrasive volume in the slot and downward abrasive/media vibration circulation route to avoid abrasive spattering to a large extent.
4. Special workpiece fixture prevents the abrasive flow from splashing out due to the high speed vibration cycle and the obstruction of the gears sinking to the bottom of the groove. And it can prevent the collision between the parts and the friction with the slot.
5. The abrasive feeding system overcomes the spattering or spilling of the abrasive out of the working trough when adding the abrasive manually.
6. According to the type, size and material of different workpieces, the machine is preset with good media mixing, vibration frequency and rotation speed to ensure that the tolerance value of the gear is not increased.
7. All key parameters are automatically and accurately controlled by the system, and can also be manually adjusted.