Sheet pretreatment line manufacturers: 6 major operating points that should be paid attention to after the shot blasting machine is put into production!

With the popularity of the industrial market, there are more and more contents of workpiece surface cleaning. For different workpiece cleaning, the shot blasting machine used must be different. The price of the shot blasting machine is different according to the model, the design is different, the cleaning of different workpieces is different, and their prices are also different. After the company purchases the shot blasting machine, it must be installed and debugged, and can only be used after achieving the best effect. So there are things that should be paid attention to in the process of using the shot blasting machine. Let's take a look today: the shot blasting machine should pay attention to these aspects in the operation, and the 6 major operating essentials that the shot blasting machine should pay attention to after it is put into production!

1. It is forbidden to operate the shot blasting machine without protective equipment.

2. Periodically turn on the dust pulse backflush to remove dust. After shutdown, extend the dust removal pulse backflushing time by 30 minutes.

3. Regularly check the wear of each wear-resistant part, and regularly clean the garbage at the filter screen and the pill valve.

4. When adding or recycling iron sand, the dust removal fan, horizontal screw, bucket elevator and vertical screw must be turned on first.

5. During the hoisting process, do not place your body under the component, try to avoid the direction where the component falls, and pay attention to hoisting safety.

6. It is forbidden to continuously turn on each control switch in the state of short interval time. Prevent excessive current from burning out the meter.